Geometría y análisis cinemático de la falla Río Blanco
Trabajo de grado - Pregrado
2021-07-14
spa: La zona de estudio se encuentra localizada en la ciudad de Manizales (Caldas, Colombia) y municipios aledaños en dirección sur y suroccidente como son Villamaría y San Peregrino. Se identifican las siguientes unidades geológicas: La Migmatita de Manizales, Complejo Quebradagrande, Formación Casabianca y depósitos aluviales cuaternarios.
La falla Río Blanco, se describe teniendo en cuenta tres sectores, sector nororiental indicada por la Reserva Río Blanco y la Sultana, sector central indicado por la antigua carrilera entre los municipios de Manizales y Villamaría, característico porque la geometría de la falla se ramifica en tres microcuencas, y el sector suroccidental, localizado entre San Peregrino y la antigua vía a Chinchiná.
El sector nororiente, presenta dos eventos deformativos, uno de cinemática sinestral y normal-sinestral en régimen dúctil, otro con movimiento destral y destral-normal en régimen frágil-dúctil, caracteres descritos en rocas del Complejo Quebradagrande (miembro Sedimentario) y Formación Casabianca. En el sector central, se encuentran tobas andesíticas con deformación frágil y movimiento normal-sinestral, en el sector suroccidental, el análisis cinemático coincide con movimientos de buzamiento inverso y normal, estructuras formadas en régimen frágil y pertenecientes a rocas del Complejo Quebradagrande.
En rocas miloníticas, se hallaron estructuras como S-C’, S-C, tipo Φ, tipo σ, tipo domino, zonas de cizalla y foliación sigmoidal; en las rocas cataclásticas, se encontraron estructuras tipo σ, fallas locales y lentes estructurales.
El estudio de microestructuras en la parte nororiente indica temperaturas de deformación entre (300-400) °C, en protomilonitas y milonitas encontradas en rocas sedimentarias como conglomerados y lodolitas con lentes de cuarzo, en la parte central, en tobas andesíticas se identifican temperaturas de deformación menores a 300°C, pertenecientes al régimen frágil, clasificándose como cataclasitas. Por último, en la parte suroccidental, Alto tablazo, en grauwacas feldespática con orientación N-S como en la parte final de San Peregrino en rocas andesíticas porfiríticas, se indican temperaturas de deformación menores a 300°C, clasificándolas como cataclasitas.
En el sector de la reserva Río Blanco, se propone superposición de dos eventos deformativos, ligados a dos movimientos encontrados en la falla con temperaturas de deformación en régimen frágil y dúctil. Las protomilonitas y milonitas se asociaron con temperaturas de deformación de (300-400) °C y expresa movimiento normal sinestral, el otro movimiento hallado se indicó en rocas en su mayoría cataclásticas y también protomilonitas, controladas por deformación frágil y dúctil, expresando en la roca un movimiento destral y destral normal, con base en la reología se puede ubicar los dos movimientos, el primero se relaciona con la parte media de la corteza y el segundo se indica entre la parte superior y media de la corteza. eng: The study area is located in the city of Manizales (Caldas, Colombia) and neighboring municipalities to the south and southwest such as Villamaría and San Peregrino. The following geological units are identified: La Migmatita de Manizales, Quebradagrande Complex, Casabianca Formation and Quaternary alluvial deposits. The Río Blanco fault is described taking into account three sectors, the northeastern sector indicated by the Río Blanco Reserve and the Sultana, central sector indicated by the old lane between the municipalities of Manizales and Villamaría, characteristic because the geometry of the fault branches into three micro-basins, and the southwestern sector, located between San Peregrino and the old road to Chinchiná. The northeastern sector presents two deformation events, one with a sinestral and normal-sinestral kinematics in a ductile regime, the other with a hatchet and hatchet-normal movement in a brittle-ductile regime, characters described in rocks of the Quebradagrande Complex (Sedimentary member) and the Casabianca Formation. In the central sector, there are andesitic tuffs with brittle deformation and normal-sinestral movement, in the southwestern sector, the kinematic analysis coincides with reverse and normal dip movements, structures formed in a brittle regime and belonging to rocks from the Quebradagrande Complex. In mylonitic rocks, structures such as S-C ', S-C, type Φ, type σ, domino type, shear zones and sigmoidal foliation were found; in cataclastic rocks, σ-type structures, local faults and structural lenses were found. The study of microstructures in the northeastern part indicates deformation temperatures between (300-400) ° C, in Protomilonites and mylonites found in sedimentary rocks such as conglomerates and mudstones with quartz lenses, in the central part, in andesitic tuffs deformation temperatures lower than 300 ° C are identified, belonging to the brittle regime, classifying them as cataclasites. Finally, in the southwestern part, Alto tablazo, in feldspathic grauwacas with N-S orientation as in the final part of San Peregrino in porphyritic andesitic rocks, deformation temperatures lower than 300 ° C are indicated, classifying them as cataclasites. In the Río Blanco reserve sector, a superposition of two deformation events is proposed, linked to two movements found in the fault with deformation temperatures in brittle and ductile regimes. Protomilonites and mylonites were associated with deformation temperatures of (300-400) ° C and express normal synesthetic movement, the other movement found was indicated in mostly cataclastic rocks and also protomilonites, controlled by brittle and ductile deformation, expressing in the rock a normal hatchet and hatchet movement, based on the rheology the two movements can be located, the first is related to the middle part of the crust and the second is indicated between the upper and middle part of the crust.
- Geología [176]
Descripción:
Trabajo de grado - principal
Tamaño: 35.17Mb
PDFLEER EN FLIP
Descripción: Acta de sustentación
Tamaño: 203.5Kb
PDF
Descripción: Carta de autorización
Tamaño: 817.1Kb
PDF
Tamaño: 35.17Mb
PDFLEER EN FLIP
Descripción: Acta de sustentación
Tamaño: 203.5Kb
Descripción: Carta de autorización
Tamaño: 817.1Kb